What is the reason for the bulging of solid wood floor
2021-10-12
1. Swelling and deformation ①The wooden floor is improperly used, and the faucet and heater in the kitchen or bathroom run out of water, which makes the wooden floor soak for too long and swells and deforms. Because the swelling size becomes larger, there is no place to stretch and can only be arched; ②Continuous rainy weather, the relative humidity in the air is high, no moisture removal measures are taken, and the wood floor absorbs moisture in the air and expands after absorbing moisture; ⑧The long-term air and poor ventilation of the house result in the evaporation of medium water in the stucco layer, nowhere to be emitted and absorbed by the wooden floor and then absorbing moisture and swelling; ④The moisture content of the base concrete is too high, and the moisture-proof layer is not sealed and it absorbs moisture and expands. 2. Leaving expansion joints or too narrow When paving, some owners did not reserve expansion joints between adjacent wooden floors as required, or asked the paving workers to keep the joints very thin, which would also prevent the floor from stretching, and it would easily arch up after being exposed to humid air. 3. The expansion joint is filled Some owners ask workers to fill the expansion joints with small wood chips, plaster, putty, or nail them with baseboards, so that the floor cannot be stretched and the floor is arched. 4. Arching at the base of the floor The base layer under the floor is arched. If the original floor has solid wood flooring before installing the floor, the original floor will be swollen with moisture after the installation of the floor, which will also cause the floor to be arched. 5. Improper floor maintenance Often mopping the floor with a wet mop, causing water to seep into the ground. If the Solid Wood Floor swells and swells, find out the reason and choose the right method to be able to recover. But if the problem is more serious, it is best to find someone to solve it.
Ms. carlos